![]() |
What is the Flashstream? |
![]() |
Programming Times |
![]() |
Devices Supported |
![]() |
Technical Specs |
![]() |
Email This Page to a Friend |
![]() |
Blog |
![]() |
Contact Us |
![]() |
Flashstream Product Sheet |
Flashstream - Technical Specs
Click here - Programming Times For Over 100+ Flash Memory Devices
Programming Times
512 Mb NAND Flash
Model | Verify Replay | E/P/V Replay |
---|---|---|
BPM 2710 | 92.8 sec | 194.0 sec |
Flashstream | 2.8 sec | 15.4 sec |
Improvement | 33.1x | 12.6x |
256 Mb NOR Flash
Model | Verify Replay | P/V Replay |
---|---|---|
BPM 2710 | 44.9 sec | 198.8 sec |
Flashstream | 0.85 sec | 54.1 sec |
Improvement | 52.8x | 3.7x |
64 Mb Serial Flash
Model | Verify Replay | P/V Replay |
---|---|---|
BPM 2710 | 71.4 sec | 144.2 sec |
Flashstream | 1.7 sec | 19.0 sec |
Improvement | 42.7x | 7.6x |
[Programming Times Disclaimer]
Call 1-800-225-2102. No Obligations.
Get Your Information Packet on the Flashstream Now.
General
Power: 90-240 VAC, 47-63 Hz, 50W, external power supply with IEC inlet
Dimensions and Weight: Width 7.5” (191mm) x height 4.5” (114mm) x depth 10.25”
(260mm), 8 lbs. (3.6 kg)
Software
Required: BPWin
File Type: binary, Intel, Motorola, RAM, straight hex, hex-space, Tekhex, Extended Tekhex, ASCII, hex, OMF, LOF, MER, and others
Device Commands: blank, check sum, compare, program, test, verify, erase
Features: data editor, revision history, session logging, on-line help, device and algorithm information
Hardware
Architecture: Concurrent Programming System with Vector Engine Co-Processor
Sites: 1 site model, multiple programmers may be linked to one PC
Calibration: annual; can be verified on site with optional socket card
Diagnostics: pin continuity test, pin drivers, power supply, communications, calibration, timing, ADC, DAC, interconnects
Memory: 4,191MB (32.7Gb) per site standard
Communications: USB 2.0
Data Pattern Broadcast: 31 Mb/s
Peak Verify Bandwidth: 20ns cycle
No firmware ROM, Software automatically performs firmware dowload
User Interface: Pass, Fail, Active, Start LEDs and Start button on each site; PC display shows systems status at a glance; auto-start mode
PC System Requirements: Microsoft Windows XP or 7
Standard Accessories
Included:
- diagnostics socket card
- software on CD-ROM
- user manual on CD-ROM
- power cable
- data cable
- 1-year hardware warranty
- 1-year software support
PIN Drivers
- Quantity: 240-pins standard
- Vpp Range: 0-13V Slew rate 2V/us
- Ipp Range: 0-50mA continuous
- Vcc Range: 0-7V Slew Rate 2V/us
- Icc Range: 0-150mA
- Pin driver Rise Time: 4ns
- Protection: overcurrent shutdown, power failure shutdown
Features
File Loading: automatic file type identification; no download time because programmer is PC controlled; supports Intel, Motorola S-record, straight hex, hex-space, Tekhex, and other file formats
Device Selection: intelligent device selector allows you to type as little or as much of the part number as you like then choose from a list of devices matching your description Devices Supported: NAND Flash, NOR Flash, EPROM, EEPROM, Flash EEPROM.
Continuity Test: each pin, including Vcc, ground, and signal pins, may be tested before every programming operation
Protection: overcurrent shutdown; powerfailure shutdown; ESD protection, reverse insertion, banana jack for ESD wrist straps
Options: available Socket Cards including, but not limited to, standard PLCC, PGA, CSP, BGA,µBGA, SOIC, QFN, MLF, LAP, QFP, TSOP, LCC, SDIP, SIMM
JobMaster™ software, Advanced Feature Software, simple and complex serialization
Programming Yield: assured by independent universal pin drivers on each socket, short distance from pin drivers to device, and accuracy of waveforms
Algorithms: all algorithms are manufacturer approved or certified (if required) -
BPM Microsystems has an excellent record of being first to provide certified algorithms for new devices
Algorithm Updates: algorithm changes and updates are available, additional algorithms available by subscription after the first year.